MaxConnect for Apple Mac Pro -[2010-2011-2012] Models is an internal hard disk drive mounting solution, that allows four additional SATA hard disk drives to be installed in the Optical bay of the Mac Pro system.
MaxConnect for the Apple Mac Pro [2009-2011-2012] models Optical bay internal hard disk expanion solutioun allows Mac Pro system to utilize two native onboard SATA DATA channels (one SATA Channel used for the Optical Drive),.
MaxConnect Flexible designs allows Mac Pro  & [2010-2011-2012] system to house eight SATA hard Disk Drives internally.(PCI Express Controller required for the two drives in the optical bay, the other two drives uses two on board sata channels.
One RAID Set of RAID 0 can be made with six on board SATA channels, the allows the RAID set to deliver sustained Transfer rate of up to 600+ MB/sec - 750+ MB/sec depending on the SATA Disk Drives.
|MaxConnect P/N||MaxConnect for Mac Pro [2009/2010/2011/2012] System|
|SZ-MP2091OPT02||MaxConnect for Mac Pro [2009/2010/2011/2012] Models
Other Product by MaxUpgrades
MaxConnect BackPlane Attachment for the SAS/SATA RAID Controllers for Mac Pro  Models Internal Drive Bays
Up to 500MB+/sec Sustained Transfer rate in MacBook Pro & MacBook Unibody
Install Eight Disk Drives Inside Mac Pro [2006-2008]Intel Xeon Models
Install Two/Four/Six/Eight 2.5 inch Disk Drives in Mac Pro [2006-2009] Optical Drive Bay
MaxConnect SAS/SATA Link with MiniSAS 4x SATA Cable
MaxConnect SAS/SATA Link with Multilane MiniSAS to MiniSAS Cable
MaxConnect SATA Link with 4-Port SATA RAID Controller for Mac Pro Systems
MaxConnect SAS/SATA Link with 4-port SAS Controller for Mac Pro Systems
Install Eight Drives in a Mac Pro System
FB-DIMM Memory Upgrades for Mac Pro System
max_flow for 800 MHz FB-DIMM Memory Cooling Mac Pro System [Early 2008 Models]
max_flow for 667 MHz FB DIMM Memory Cooling for the Mac Pro System [2006/2007 Models]